edit listview subitem in vb6 runtime error

Pressing MENU does not bring up the camera menu. When accessing the PTZ menu directly on the DVR user interface, none of the controls have an effect and the camera continues with its patrol sequence. The camera starts, shows the start-up screen, then goes through a previous patrol scan. Settings show up OK when the camera initialises

Set the same settings in the DVR PTZ camera, Pelco-P protocol, 9600 baud, camera 007 The entered signs will be written to the SubItem after TextBoxLostFocus event was raised (by clicking on the ListView control or hit RETURN key). Connect the RS485 camera wires to the pins of the 25-pin D-type on my Avtech DVR pin12 - black/green = R(A), pin 24 - black/yellow = R(B). A double click on the ListView.SubItem will visualize a TextBox overlaying the SubItem with same size. Configured camera with dip switches 9600 baud, camera #7, Pelco-P protocol (=1110100), 4-wire RS485 (=1000, tried 2-wire also = 1111), last camera in chain as I only connect 1 camera at a time. It was due to the references to two different versions of WIndows Common Controls. Other wires are for the alarm inputs and outputs (purple, green, red, black, yellow, blue, brown, orange, grey, white, pink, light green) The camera is a second user camera where the cable has been cut of, so I had to workout the wiring. I managed to get hold of the camera user and service manual, DVR manual, additional instructions re Pelco-P and RS485 from Panasonic Fortunately for all us, we can still download the Microsoft Visual Basic.

I can see CCTV video fine, but am unable to control it with the DVR PTZ controls and it just runs a previous patrol scan Excel VBA ListView control examples (adding ListView in VBA, edit subitems. Wonder if there someone out there with a similar setup or more experience than me with RS485.Ĭonnect the camera to the DVR via RS485.

Edit listview subitem in vb6 runtime error